What Does a Coworking or Shared Office Space Need Electrically?

A coworking fitout needs far more power points per desk than a standard office, submetering for fair billing, backup protection for shared IT, and a switchboard that can handle a layout that keeps changing as the business grows.

What does a coworking or shared office space need electrically? A coworking fitout needs far more power points per square metre than a standard office, a submetering setup that can bill members fairly for what they actually use, backup protection for shared internet and server equipment, and a switchboard that can handle a floor plan that gets reconfigured every time a new member joins. Most of these needs only surface once an operator is partway through a fitout or has been trading for a year and starts adding desks the original board was never sized for.

⚡ Quick Answers: Coworking Electrical Requirements

  • How many power points does a hot desking floor actually need? Plan for at least one double power point per desk position plus floor boxes or perimeter trunking for shared tables, well beyond the point count a conventional office of the same size would use.
  • Does a coworking space need its own submeter for every suite? Any private office or suite billed separately to a member should have its own check meter or submeter so usage can be invoiced accurately rather than estimated.
  • What about EV charging for members and staff? It is increasingly expected in larger coworking campuses, but it needs its own load calculation and often its own network application rather than being added to an already full switchboard.
  • Is backup power worth it for a coworking operator? For the shared internet, server rack and access control systems that the whole floor depends on, a dedicated UPS circuit is one of the cheaper insurance policies available.
  • Does a growing coworking space eventually need three phase power? Many do, once air conditioning load, kitchen equipment, server racks and EV charging are all added to what began as a single phase office tenancy.

1. Power point density most offices were never designed for

A conventional office was typically wired for one or two double power points per workstation, plus general floor coverage. A coworking fitout multiplies that. Hot desking areas need power at every seat, meeting pods need their own circuits for screens and conferencing equipment, and phone booths and focus rooms each need a dedicated point for a laptop, a monitor and often a small heater or fan. Floor boxes and perimeter trunking let an operator add desks later without chasing new cable through a finished floor, which matters because coworking floor plans change far more often than a standard tenancy's.

Table C2 of AS/NZS 3000 sets out how socket outlet load is calculated for business premises, factory and office tenancies, and it is worth getting an electrician to run that calculation properly before a fitout locks in a desk count, rather than discovering the submain is undersized once every desk is occupied.

2. Submetering: billing members fairly for what they actually use

Where a coworking operator charges members for a dedicated suite or a private office rather than a shared desk, a submeter on that tenancy lets usage be billed accurately instead of split evenly across everyone on the floor. This matters most where one tenant runs server equipment, specialist machinery or extended hours that genuinely use more power than a typical member. Smart meter upgrades can also give an operator better visibility of where load is actually going across a shared floor, which is useful when planning the next expansion.

3. UPS and surge protection for shared internet and server equipment

The one thing every member of a coworking space depends on is the internet staying up. A dedicated, surge protected circuit for the comms rack, with an uninterruptible power supply sized to ride through a short outage while equipment shuts down gracefully, is standard practice in any shared workspace that takes its uptime seriously. AS/NZS 3000 requires an independent isolating switch for UPS units and power converters, mounted on or next to the equipment and lockable in the off position, which also makes maintenance safer down the track.

4. Switchboard capacity for a floor plan that keeps changing

Coworking operators grow by adding desks, converting a lounge into bookable meeting rooms, or splitting one large suite into several smaller ones. Each of those changes adds load to a switchboard that was sized for the fitout as it existed on day one. A proper maximum demand assessment against the current desk count and equipment list, not the original lease plan, is the only reliable way to know whether a switchboard still has headroom or needs a switchboard upgrade before the next round of growth.

5. EV charging and amenity upgrades members now expect

Larger coworking campuses with their own car parking are increasingly fielding requests for EV charging from members, and getting this right usually means more than bolting a charger onto an existing circuit. Three phase EV charger installation suits a car park serving several vehicles at once, while a smaller single charger for staff parking can often run from a commercial EV charger installation sized to the building's existing supply. Either way, the load has to be added to the building's maximum demand calculation properly rather than assumed to fit.

Why it's Level 2 ASP work

Once a coworking fitout needs a new submain, a bigger consumer mains connection, or a network application to the distributor for added capacity, that work has to be carried out by a licensed Level 2 electrician in Sydney. A standard electrician can wire the desks and power points inside the tenancy, but connecting new or upgraded supply to the network itself, and certifying that connection, is Level 2 ASP work specifically. If the building sits near a network boundary, it is worth confirming which distributor actually serves the address before lodging an application, which you can check your network area in seconds with our postcode checker.

How High Demand Electrical helps

High Demand Electrical is a licensed local team, not a call centre, and we work with commercial landlords and coworking operators across Sydney on exactly this kind of staged fitout, where the electrical scope grows in steps rather than arriving all at once. We carry out power supply upgrades and switchboard upgrades for existing tenancies that have outgrown their original board, and full electrical safety inspections before a lease renewal or a major refit locks in a new desk count.

If a coworking space is planning to add EV charging, split a floor into more submetered suites, or simply suspects the switchboard is already close to its limit, a proper maximum demand assessment against the current fitout is the right starting point. We also handle the single phase to three phase upgrade that many growing coworking floors eventually need once air conditioning, kitchen equipment and EV charging are all competing for the same supply, and for a parallel look at how shared metering plays out in a different setting, see our guide to basement car park switchboard and metering.

Coworking Electrical Requirements FAQs (Sydney)

How much does it cost to add more power points to a coworking fitout?

It depends heavily on whether the existing switchboard has spare capacity or needs an upgrade first, and whether cabling can run through an accessible ceiling space or needs floor boxes cut into a finished slab. A site assessment is the only reliable way to scope this properly.

Can an existing office switchboard handle a coworking conversion?

Sometimes, but it should never be assumed. A maximum demand assessment against the planned desk count, meeting rooms and any EV charging or kitchen equipment is the way to find out before signing off on a fitout budget.

Does every private suite in a coworking building need its own submeter?

Not legally in every case, but it is the only way to bill a tenant fairly for what they actually use rather than splitting costs evenly, and it avoids disputes over who is using more power than their share of the floor.

What happens if a coworking floor's internet goes down during a power outage?

A dedicated UPS circuit for the comms rack can keep the network and access control running through a short outage, giving equipment time to shut down safely rather than cutting out instantly. See power supply upgrades for how this is usually added to an existing switchboard.

Is three phase power necessary for a coworking space?

Not always, but it becomes worth assessing once air conditioning, a shared kitchen, server racks and EV charging are all drawing from the same supply. See our guide to the single phase to three phase upgrade for what that involves.

Get a Switchboard Upgrade Quote from High Demand Electrical, or call 0402 559 777 to discuss your coworking fitout. Every job needs a proper site assessment before scope or pricing can be confirmed.

Need Help Fast?

Choose your issue to get expert solutions, upfront pricing, and clear next steps—or speak with a local electrician today.
Emergency Electrician Near Me
Public Holiday Electrician
Weekend Electrician
After Hours Electrician
Emergency Consumer Mains
Cut Underground Cable
Underground Power Fault
Service Line Pulled Off House
Tree On Power Lines
Low Hanging Power Lines
Fallen Power Line
Power Pole Hit By Car
Leaning Power Pole
Fallen Power Pole
Power Surge Damage
Lightning Strike Damage
Storm Damage Meter Box
Storm Damage Switchboard
Flood Damage Electrical Repairs
Storm Damage Electrician
Lights Flickering
Fuse Keeps Blowing
Safety Switch Keeps Tripping
Circuit Breaker Keeps Tripping
Main Switch Won't Reset
Burnt Meter Box
Smoke Coming From Meter Box
Emergency Switchboard Repairs
Buzzing Switchboard
Smoke Coming From Switchboard
Sparking Switchboard
Burning Smell From Switchboard
Electrical Fault Finding
Power Restoration
Power Restored But No Power
Partial Power Loss
No Power to House
Power Outages

Follow Us On Our Social Media

Powering Your Needs with Expertise

If you’re looking for a reliable, experienced, and prompt electrician, look no further than High Demand Electrical. We cater to all your electrical needs, from routine maintenance to emergency repairs and complete system installations. Our skilled team is committed to providing professional service that ensures your electrical systems run smoothly. Whether it's a small task or a large project, give us a call today. Let us meet all your electrical demands with the quality and reliability you deserve.