A standard 7kW single-phase Tesla / Wallbox / Schneider install in Parramatta typically runs $1,400–$2,400 fitted, including the charger, cable run, dedicated 32A circuit and commissioning. If the switchboard needs upgrading first the combined job is usually $3,200–$5,200. Three-phase 22kW installs run $2,800–$4,800.

It depends on the age. Parramatta homes with ceramic fuses or 60A main fuses almost always need an upgrade or load-managed charger first. Modern boards from the last 15 years usually take a 32A circuit fine. We check at site assessment.

If the install involves switchboard modifications, consumer mains, meter changes or Ausgrid coordination — yes. Even on a straightforward install we recommend Level 2 because Parramatta's older housing stock often surprises non-Level-2 installers.

Yes — we're a certified Tesla installer. We fit the Wall Connector (Gen 3) and the Universal Wall Connector, register the install with Tesla, pair with the app and run a full commissioning test against your vehicle.

For 90% of Parramatta homes a 7kW single-phase charger is the right answer — it adds ~280 km of range overnight and doesn't require a three-phase upgrade. 22kW makes sense for two-EV households, work-from-home drivers on tight schedules and small commercial fleets.

Very common in Parramatta. We run dedicated cable in conduit, trench where needed, and quote everything up front. Cable distances over 25m may need a slightly bigger conductor — included in the assessment.

Yes. Chargers like Zappi, Wallbox Pulsar Plus and Schneider EVlink Pro can prioritise solar export — they'll throttle charging speed to match what your panels are producing, so you're charging from the roof rather than the grid.